Avalanche forecast

Soldier & Wood River Valley Mtns

Sawtooth Avalanche Center
View on map

Avalanche danger

Wed
Alpine
2 · Moderate
Treeline
2 · Moderate
Below
1 · Low
Open full map
Out of date — this forecast expired 4 years ago. You’re viewing past conditions, not the current bulletin.

Highlights

You may be able to trigger avalanches in both wind-affected and sheltered terrain. In areas exposed to the wind, you could trigger hard or soft drifts or slabs that formed over the past several days. In areas more protected from the wind,  triggering a 1-2 foot thick avalanche is not out of the question on shady slopes facing E-N-W. Pay attention to the consequences of being caught in even small slides in terrain with rocks, cliffs, trees, and terrain traps.

Avalanche problems

  • Wind Slabs

    • Alpine
    • Treeline
    • Below treeline
    Likelihood
    Possible
    Size
    1–2

    What is it?  Last week's NW-N-NE winds formed 1-3 foot thick, hard and soft wind slabs in exposed terrain. Over the weekend, light snowfall and continued northerly winds formed a thinner, softer generation of wind slabs. Yesterday, we spotted a large, fairly recent wind slab avalanche in the Soldier Mtns (photo to right/below). Recent observations report widespread wind-affected snow surfaces throughout the forecast area. Reports of snowpack cracking have gradually decreased in the past couple of days, but professionals continue to steer clear of recently formed wind slabs.

    Where is it?  Wind slabs are largest and most widespread near exposed ridges. You may find them near ridgelines, on the sides of gullies and chutes, and near prominent terrain features. Wind slabs appear to be larger and more widespread in the western half of this zone.

    How can you recognize it?  Cracks shooting out from your skis or sled are an obvious sign of instability. Watch for drifts, dunes, and ripples on the snow surface. Wind slabs can have a smooth, chalky appearance and feel and sound hollow, like a drum. Wind-deposited snow will be stiffer and keep your skis or snowmobile closer to the surface.       

    How can you manage it?  The easy move is to avoid obviously wind-loaded avalanche terrain. Hard slab avalanches can behave unpredictably, breaking above skiers and riders. Any triggered wind slab could "step-down" to buried persistent weak layers (Problem 1) lower on slopes, causing a larger destructive avalanche.  

    (1/30/2023) This large avalanche in the N Fork Soldier Ck drainage released on a SE aspect near 9000', likely over the Jan 28-29 weekend.

  • Persistent Slabs

    • Alpine
    • Treeline
    • Below treeline
    Likelihood
    Possible
    Size
    1.5–2.5

    What is it?  The most recent human-triggered avalanche occurred Sunday on a partially treed, sheltered slope near Titus Ridge on Galena Summit. The 1-2 foot thick avalanche failed on a buried layer of surface hoar on a N-NE aspect near 9100'. This weak layer remains capable of producing avalanches on slopes steeper than about 35 degrees. 

    Where is it?  Thesurface hoar is most widespread and problematic in protected, middle-elevation terrain that faces E-N-W. Surface hoar is a tricky weak layer. It can be "spotty" in its distribution—it may exist on some slopes, but not others. You're more likely to encounter this problem in the Soldier Mtns and near Dollarhide Summit; in the Wood River Valley mountains, most slopes lack a slab above this weak layer. 

    How can you recognize it?  Assume this problem exists until proven otherwise. You may or may not experience snowpack collapsing and/or cracking while traveling. These red flags are obvious signs of instability. The layer of surface hoar is subtle and may not "jump out at you" when searching for it in a snowpit.         

    How can you manage it?  You can reduce your risk by avoiding shady slopes (facing E-N-W) that are very steep (greater than about 35 degrees)—especially those with ugly consequences if you are caught in an avalanche. While the observed avalanche activity points to the layer being more common on sheltered slopes, don't rule out its existence in terrain exposed to the wind. These avalanches may break wider than expected or higher on the slope above you. 

    ADDITIONAL DISCUSSION: Older weak layers—crusts and/or facets, and spotty surface hoar—exist deeper in the snowpack. These are buried beneath dense, 2-4' thick slabs, making them difficult to trigger but capable of producing very dangerous avalanches. You're most likely to trigger a slide involving these deeper weak layers in rocky, wind-affected, alpine terrain. Slopes like these have variable snow depths, with thinner areas of the snowpack that allow us to impact deeper weak layers. The recent persistent slab avalanche in the Pioneer Mountains is a great example (above/right, details)

    (1/24/2023) This recent large avalanche occurred on the shoulder of Duncan Ridge in the Pioneer Mountains. It appears to be a heavily wind-loaded slope that broke on a persistent weak layer. A smaller wind slab avalanche is visible further right in the image. 10,100', WSW.

Avalanche Discussion

Over the past month, we've seen a significant divergence in the character of the snowpack within and between forecast zones. In a broad sense, you can lump them into two categories: shallow and deep. The Soldier and Wood River Valley Forecast Zone straddles the boundary between these categories. 

On the eastern side of this zone and in the mountains above the Wood River Valley, the snowpack remains thin (around 3' deep) and much of the snowpack is faceting. When this happens, the slabs in the snowpack lose strength—triggering avalanches becomes more difficult. Here, you are much more likely to trigger a slide where recent winds have built slabs on top of the weak snowpack.

On the western side of this zone (Dollarhide and west to the Soldiers), the snowpack is thicker (4-6' deep), and the slabs above the weak layers remain intact. Weak layers buried in November and December lie beneath very dense, heavy slabs of snow. Impacting these weak layers is less likely. However, the prominent weak layer that was buried in January is sitting under a 1-2 foot thick slab; impacting it remains a real possibility. This layer is ugliest on wind-protected, shaded slopes (those on the northern half of the compass) where surface hoar formed. However, a pattern of unstable snowpack test scores on sunnier slopes—where facets and surface hoar lie above a crust—is worth keeping in mind as you travel through the mountains. 

On top of these weak layers, a few generations of wind slabs formed in the past week. The most recently formed slabs are likely to be softer and more reactive to your weight. However, the large, recent slide in the Soldier Mtns probably involved rock-hard snow that drifted onto the slope last week; triggering beasts like that is a possibility. Triggered wind slabs can be effective triggers for deeper weak layers in the snowpack. 

The consequences of triggering avalanches can vary significantly. Triggering a small slide in terrain free of rocks, trees, and terrain traps is much less dangerous than triggering a slide in extreme, rocky, treed terrain with a terrain trap at the bottom. Spend some time thinking about the consequences of being caught in a slide as you are choosing your terrain for the day. 

Regions covered