Mt Hood Avalanche Forecast
Jan 10th, 2020 10:00AM
Heavy snow and strong winds will create very dangerous avalanche conditions. You will be able to trigger avalanches large enough to bury, injure, or kill you. If you do travel in the backcountry stick to ridges and low-angle slopes. Avoid travel on or underneath slopes steeper than 35 degrees.
January 9th, 2020 (The regional synopsis is updated every Thursday @ 6 pm)
As we said Happy New Year and rang in 2020, snow was turning to rain at many trailheads and lower elevation Passes, not exactly the fresh start winter recreationalists had in mind. The snowpack was already looking a little thin throughout the region, especially at lower elevations. Low snow in places like Snoqualmie Pass made backcountry travel difficult and hazardous. NWAC’s snow depth climatology report was showing snow depths 25-64% of normal to kick off the start of 2020.
Things can change quickly in the Pacific Northwest and they did as we entered an extended storm cycle between January 2nd to January 8th. Strong winds, fluctuating temperatures, and heavy precipitation offered few breaks in the weather over this period limiting observations and hampering travel. Despite periods of rain at lower elevations, most areas saw several feet of new snow with big jumps in total snow depths as a westerly storm track strongly favored the West Slopes of the Cascades and the Olympics for the highest precipitation totals.
Total Snow Depth (in) 1/2/20
Total Snow Depth (in) 1/8/20
Heather Meadows Mt Baker
Crystal Mt Green Valley
Paradise Mt Rainier
White Pass Upper
Mt Hood Meadows
We may have started with a shallow snowpack, but most locations increased their snowpack by 70% or more over this storm cycle!
During this extended and impressive storm cycle that included backcountry avalanche warnings, natural avalanches were reported in many areas Jan 6th-7th.
The Stevens Pass area was especially active over the period with over 100(!) avalanche observations made on the 6th and 7th. Professionals reported numerous avalanches in places that they hadn't previously observed avalanches and some paths avalanched multiple times in a 24 hour period. Observers reported a few very large (size D2.5-3) avalanches, originating at upper elevations with deeper crowns that likely formed from wind drifting. Topping off an active couple of days, warming temperatures lead to a widespread loose wet avalanche cycle.
The southern Washington Cascades, the Wentachee Mountains and Mt. Hood either saw less precipitation, warmer temperatures leading to more rain than snow, or some combination of the two and ended up with relatively less active avalanche conditions than areas further north.
A large natural avalanche on Rock Mountain near Berne along Hwy 2 east of Stevens Pass that released Jan 6th or 7th. Photo: Josh Hirshberg 1/7/20
Many small storm slabs released in the Crystal backcountry 1/6-1/7. Pinwheels in the photo suggest loose wet avalanche activity occurred when temperatures rose above freezing and snow turned to rain.
Another active and colder weather pattern is on it’s way. Enjoy yourself out there and be sure to check the forecast before heading out. Remember, NWAC is a community-supported avalanche center and when you submit an observation you make the forecast better!
It’s getting deeper! Photo: Jeremy Allyn
Strong winds will rapidly transport new snow and build fresh wind slabs on lee slopes. You will be able to trigger large and dangerous avalanches on slopes where you see signs of wind transported snow such as cornices, and pillow-like drifts of snow. Avalanches may be able to run long distances in many places where a firm crust exists under recent snow. Avoid travel on or below slopes steeper than 35 degrees.
Release of a cohesive layer of snow (a slab) formed by the wind. Wind typically transports snow from the upwind sides of terrain features and deposits snow on the downwind side. Wind slabs are often smooth and rounded and sometimes sound hollow, and can range from soft to hard. Wind slabs that form over a persistent weak layer (surface hoar, depth hoar, or near-surface facets) may be termed Persistent Slabs or may develop into Persistent Slabs.
Wind Slabs form in specific areas, and are confined to lee and cross-loaded terrain features. They can be avoided by sticking to sheltered or wind-scoured areas..
Wind Slab avalanche. Winds blew from left to right. The area above the ridge has been scoured, and the snow drifted into a wind slab on the slope below.
Wind slabs can take up to a week to stabilize. They are confined to lee and cross-loaded terrain features and can be avoided by sticking to sheltered or wind scoured areas.
New snow is stacking up this evening and more is expected tonight. With heavy snowfall continuing, remember that you are most likely to trigger storm slabs during periods of continued heavy snowfall. If you see evidence of natural avalanches, even small ones, that’s a clue that storm slabs will exist on all slopes. Look for cracks shooting through the snow or strong snow above weak snow. When you see these signs, choose lower angle terrain less than 35 degrees.
With cold temperatures and lots of new snow you may find wind-sheltered areas with deep uncohesive loose snow. These loose snow avalanches or “sluffs” can be large enough to push you over or knock you into tree wells or open creeks. Be aware of stopping below steep slopes or above hazards like creeks and cliffs.
Release of a soft cohesive layer (a slab) of new snow that breaks within the storm snow or on the old snow surface. Storm-slab problems typically last between a few hours and few days. Storm-slabs that form over a persistent weak layer (surface hoar, depth hoar, or near-surface facets) may be termed Persistent Slabs or may develop into Persistent Slabs.
You can reduce your risk from Storm Slabs by waiting a day or two after a storm before venturing into steep terrain. Storm slabs are most dangerous on slopes with terrain traps, such as timber, gullies, over cliffs, or terrain features that make it difficult for a rider to escape off the side.
Storm slabs usually stabilize within a few days, and release at or below the trigger point. They exist throughout the terrain, and can be avoided by waiting for the storm snow to stabilize.
Elevations:Treeline, Below Treeline.
Valid until: Jan 11th, 2020 10:00AM