Avalanche Forecast

You are most likely to encounter and trigger new unstable storm snow due to warming temperatures and high precipitation rate.  New storm slabs are often widespread and can easily be triggered by a traveler. In some locations wind will transport snow forming firmer and deeper surface slabs. Because these easily triggered storm slabs are in most startzone, this is the time to stay off of all slope greater than 30 degrees. During periods of heavy precipitation and blowing snow expect natural storm slabs avalanches. Any new snow avalanche may act as a trigger for much larger and deeper persistent slab avalanches.

Release of a soft cohesive layer (a slab) of new snow that breaks within the storm snow or on the old snow surface. Storm-slab problems typically last between a few hours and few days. Storm-slabs that form over a persistent weak layer (surface hoar, depth hoar, or near-surface facets) may be termed Persistent Slabs or may develop into Persistent Slabs.

You can reduce your risk from Storm Slabs by waiting a day or two after a storm before venturing into steep terrain. Storm slabs are most dangerous on slopes with terrain traps, such as timber, gullies, over cliffs, or terrain features that make it difficult for a rider to escape off the side.

Storm slabs usually stabilize within a few days, and release at or below the trigger point. They exist throughout the terrain, and can be avoided by waiting for the storm snow to stabilize.

A persistent layer of buried surface hoar and/or facets has been the culprit in many of this regions very large avalanches. This layer is deep in the snowpack. In many locations it is 3-6 feet below the snow surface. You are most likely to find the buried persistent weak layer above 6000 ft in this region.

Deep persistent slabs are tricky. They often don’t show obvious signs of instability, are difficult to assess, and can be hard to trigger. Any avalanche failing on this layer is likely to be very large, and destructive.

Release of a thick cohesive layer of hard snow (a slab), when the bond breaks between the slab and an underlying persistent weak layer, deep in the snowpack or near the ground. The most common persistent weak layers involved in deep, persistent slabs are depth hoar or facets surrounding a deeply buried crust. Deep Persistent Slabs are typically hard to trigger, are very destructive and dangerous due to the large mass of snow involved, and can persist for months once developed. They are often triggered from areas where the snow is shallow and weak, and are particularly difficult to forecast for and manage. They commonly develop when Persistent Slabs become more deeply buried over time.

Deep Persistent Slabs avalanches can be destructive and deadly events that can take months to stabilize. You can trigger them from well down in the avalanche path, and after dozens of tracks have crossed the slope.

A snowboarder triggered this Deep Persistent Slab near treeline, well down in the path.

Deep, persistent slabs are destructive and deadly events that can take months to stabilize. You can triggered them from well down in the avalanche path, and after dozens of tracks have crossed the slope. Give yourself a wide safety buffer to handle the uncertainty, potentially for the remainder of the season.

If you travel on steep slopes where it has rained you will likely trigger a loose wet avalanche. Don’t let these relatively small avalanches fool you. They can be dangerous if they carry you into terrain traps such as gullies, cliffs, rocks, and trees.

Release of wet unconsolidated snow or slush. These avalanches typically occur within layers of wet snow near the surface of the snowpack, but they may quickly gouge into lower snowpack layers. Like Loose Dry avalanches, they start at a point and entrain snow as they move downhill, forming a fan-shaped avalanche. They generally move slowly, but can contain enough mass to cause significant damage to trees, cars or buildings. Other names for loose-wet avalanches include point-release avalanches or sluffs. Loose Wet avalanches can trigger slab avalanches that break into deeper snow layers.

Travel when the snow surface is colder and stronger. Plan your trips to avoid crossing on or under very steep slopes in the afternoon. Move to colder, shadier slopes once the snow surface turns slushly. Avoid steep, sunlit slopes above terrain traps, cliffs areas and long sustained steep pitches.

Several loose wet avalanches, and lots of pinwheels and roller balls.

Loose wet avalanches occur where water is running through the snowpack, and release at or below the trigger point. Avoid terrain traps such as cliffs, gullies, or tree wells. Exit avalanche terrain when you see pinwheels, roller balls, a slushy surface, or during rain-on-snow events.