Avalanche Forecast

Issued: Dec 28th, 2018 10:00AM

The alpine rating is considerable, the treeline rating is considerable, and the below treeline rating is considerable. Known problems include Loose Wet, Wind Slabs and Persistent Slabs.

Northwest Avalanche Center NWAC, Northwest Avalanche Center

Dangerous avalanche conditions exist. Rain, snow, and gusty winds will test an already weak snowpack. Travel very cautiously if you venture out in the storm on Saturday.

Summary

Snowpack Discussion

Regional Synopsis: December 24, 2018

In most parts of the state, a stout melt freeze crust was formed when it rained to high elevations around Thanksgiving. The one exception to this event was in the East North Zone, where the precipitation from the Thanksgiving storm was all snow. A quick storm at the end of November put a small amount of snow above the melt-freeze crust, and preserved the older basal facets in the northeastern areas.

Cold and clear weather dominated the first week in December, with valley fog and very cold temperatures east of the crest. The surface snow sat around and decomposed. Surface hoar grew large on top of this.

The jet stream took aim at the Pacific Northwest in the 2nd week of December.  Most notably, light storms buried and preserved a widespread layer of surface hoar and/or near surface facets on December 9th. From December 9th to December 23rd, storms kept coming. Freezing levels fluctuated, but never moved much above 5000ft throughout the Cascades (although the southernmost volcanoes and Mt. Hood saw rain well above 6000).

Initially, the storm track favored the northern zones. The accompanying avalanche cycle began on December 11th. Most of these slides were soft slabs, but some propagated widely on the December 9th layer. Higher snowfall totals in the West North resulted in very large (D3+) avalanches in the mountains along Hwy 542.

A second, and larger avalanche cycle occurred during heavy snowfall and strong wind events between December 18th and 20th. Although these cycles were once again most prevalent in the northern and eastern zones, big storm totals around Mt. Rainier tipped the balance down south as well. This 2nd cycle was impressive, with very large and destructive avalanches (some D4) reported. The culprit was once again the December 9th surface hoar/facets (and/or the basal facets in the northern and eastern zones).

Today we have a large difference in snowpack depths between the Pacific Crest and the Eastern Slope. This is nothing unusual, as more often than not the west side of the Cascades and the passes get more snow than areas further east. Moving forward, places with a deep snowpack (say greater than 5ft) and warmer temperatures may continue to gain strength. Areas with a shallow snowpack (say less than 3.5ft) may take much longer. In a general and applied sense, this means the avalanche danger/conditions may begin to diverge between the western and eastern zones.  

Happy Holidays

Problems

Loose Wet

An icon showing Loose Wet

Loose wet avalanches are likely on steep slopes at mid and low elevations. Avoid travel in avalanche terrain if you witness heavy rain falling on dry snow. As wet avalanches run downslope, they could entrain large amounts of snow and even trigger slab avalanches. Look for roller balls and pinwheels as indicators of weakening snow surfaces. Avoid gullies and other confined terrain features where debris could pile up and increase the consequences of even a small avalanche.

Release of wet unconsolidated snow or slush. These avalanches typically occur within layers of wet snow near the surface of the snowpack, but they may quickly gouge into lower snowpack layers. Like Loose Dry avalanches, they start at a point and entrain snow as they move downhill, forming a fan-shaped avalanche. They generally move slowly, but can contain enough mass to cause significant damage to trees, cars or buildings. Other names for loose-wet avalanches include point-release avalanches or sluffs. Loose Wet avalanches can trigger slab avalanches that break into deeper snow layers.

 

Travel when the snow surface is colder and stronger. Plan your trips to avoid crossing on or under very steep slopes in the afternoon. Move to colder, shadier slopes once the snow surface turns slushly. Avoid steep, sunlit slopes above terrain traps, cliffs areas and long sustained steep pitches.

 

Several loose wet avalanches, and lots of pinwheels and roller balls.

Loose wet avalanches occur where water is running through the snowpack, and release at or below the trigger point. Avoid terrain traps such as cliffs, gullies, or tree wells. Exit avalanche terrain when you see pinwheels, roller balls, a slushy surface, or during rain-on-snow events.

Elevations: Treeline, Below Treeline.

Likelihood

Likely

Expected Size

1 - 1

Wind Slabs

An icon showing Wind Slabs

Heavy snowfall paired with strong and gusty winds will redistribute snow and build fresh wind slabs. You will encounter the problem near and above treeline on the lee side of ridges and on cross-loaded slopes and terrain features. Work to identify wind-drifted snow by paying close attention to sudden changes in snow surface texture and hardness. Stick to sheltered slopes or wind-scoured areas. 

Release of a cohesive layer of snow (a slab) formed by the wind. Wind typically transports snow from the upwind sides of terrain features and deposits snow on the downwind side. Wind slabs are often smooth and rounded and sometimes sound hollow, and can range from soft to hard. Wind slabs that form over a persistent weak layer (surface hoar, depth hoar, or near-surface facets) may be termed Persistent Slabs or may develop into Persistent Slabs.

 

Wind Slabs form in specific areas, and are confined to lee and cross-loaded terrain features. They can be avoided by sticking to sheltered or wind-scoured areas..

 

Wind Slab avalanche. Winds blew from left to right. The area above the ridge has been scoured, and the snow drifted into a wind slab on the slope below.

 

Wind slabs can take up to a week to stabilize. They are confined to lee and cross-loaded terrain features and can be avoided by sticking to sheltered or wind scoured areas.

Aspects: All aspects.

Elevations: Alpine, Treeline.

Likelihood

Likely

Expected Size

1 - 1

Persistent Slabs

An icon showing Persistent Slabs

The persistent weak layers near the ground are significant concerns. Give them time to adjust as they get tested again with new snow, wind, and rain.

Persistent slab avalanches can be triggered several days or even weeks after a storm. They can break widely across terrain features and can act in surprising ways. They require diligent snowpack investigation and cautious terrain selection. Be especially careful of upper elevation slopes where winds have drifted snow creating stiffer and thicker slabs.

To reduce the risk of triggering a persistent slab avalanche:

• Limit the amount of time you spend on or near large slopes 30 degrees and steeper.

• Put an extra buffer of terrain between where you travel and where avalanches could start, run, or stop.

• Stay away from features where avalanches are commonly triggered: rocks, steep roll-overs and convexities, unsupported slopes, and areas of shallow, variable snow.

• When in doubt, avoid avalanche terrain.

Release of a cohesive layer of soft to hard snow (a slab) in the middle to upper snowpack, when the bond to an underlying persistent weak layer breaks. Persistent layers include: surface hoar, depth hoar, near-surface facets, or faceted snow. Persistent weak layers can continue to produce avalanches for days, weeks or even months, making them especially dangerous and tricky. As additional snow and wind events build a thicker slab on top of the persistent weak layer, this avalanche problem may develop into a Deep Persistent Slabs.

 

The best ways to manage the risk from Persistent Slabs is to make conservative terrain choices. They can be triggered by light loads and weeks after the last storm. The slabs often propagate in surprising and unpredictable ways. This makes this problem difficult to predict and manage and requires a wide safety buffer to handle the uncertainty.

 

This Persistent Slab was triggered remotely, failed on a layer of faceted snow in the middle of the snowpack, and crossed several terrain features.

Persistent slabs can be triggered by light loads and weeks after the last storm. You can trigger them remotely and they often propagate across and beyond terrain features that would otherwise confine wind and storm slabs. Give yourself a wide safety buffer to handle the uncertainty.

Aspects: All aspects.

Elevations: All elevations.

Likelihood

Likely

Expected Size

2 - 2

Valid until: Dec 29th, 2018 10:00AM