Register
Get forecast notifications
Create an account to receive email notifications when forecasts are published.
Login
Archived

Avalanche Forecast

Feb 23rd, 2020–Feb 24th, 2020
Alpine
3: Considerable
The avalanche danger rating in the alpine will be considerable
Treeline
3: Considerable
The avalanche danger rating at treeline will be considerable
Below Treeline
3: Considerable
The avalanche danger rating below treeline will be considerable
Alpine
3: Considerable
The avalanche danger rating in the alpine will be considerable
Treeline
3: Considerable
The avalanche danger rating at treeline will be considerable
Below Treeline
2: Moderate
The avalanche danger rating below treeline will be moderate

Heavy snowfall continues to overload weak and variable old snow surfaces maintaining dangerous avalanche conditions. You can trigger large and surprising avalanches on slopes 30 degrees and steeper. Seek out supported and low-angle terrain and avoid convex rollovers and terrain traps.

Discussion

Numerous natural and triggered avalanches were reported on Sunday in the West North zone. Poor visibility and heavy snowfall limited observers from documenting the full extent of recent avalanche activity, but evidence of a widespread avalanche cycle was easy to find near and below treeline. Most avalanches were small (D1) and failed on a mid-storm interface 4-8in deep, while others failed on the old/new snow interface (2/22) buried about 1ft deep. Many avalanches had wide propagation and some were even triggered remotely.

Expect heavy snowfall (2000ft snow levels) to continue overnight before tapering off Monday with a cooling trend. Natural avalanche activity is expected overnight, with dangerous avalanche conditions continuing on Monday, especially in the early morning hours.

Natural storm slab (D1) that broke about 1ft deep on the old/new snow interface (buried 2/22) on a SW aspect near 4200ft in Swift Creek. 02/23/20. Photo: Jason Speer

Snowpack Discussion

February 20, 2020 (The regional synopsis is updated every Thursday @ 6 pm)

Intermittent Storms

January’s non-stop pattern of storms extended into the first week of February. Since then, we’ve transitioned to more intermittent storms with notable stretches of high pressure and dry weather. We now see more variability through the region in the snowpack layering and avalanche conditions than in January. 

Significant periods of calm weather in February have allowed avalanche danger to decrease between storms. During the clear periods, strengthening late winter sun and gradual warming has brought some loose wet avalanche cycles to sunny slopes. Even so, from February 1st-20th there were 10 days when one or more zones were forecasted at all Low danger. In comparison, the month of January had zero days with any zone forecasted at all Low avalanche danger. 

Surface hoar near Snoqualmie Pass. February 19th. Photo: Ely Gerbin

Looking Forward

As we look forward, there are a number of considerations that are pertinent to most zones. The pattern of storms separated by clear periods may form new weak layers and interfaces to monitor. Many zones hold variable surfaces that warrant consideration as a travel hazard. In the Mt Hood Meadows area, two fatalities were related to falls on slick surfaces over President’s Day weekend. Another important consideration is the cornice growth that occurred in the past month from predominantly west winds. Very large cornices loom on ridges in most zones, except for possibly the Olympic Mountains. Future warming could be the added ingredient needed for cornices to fall. A close call with a cornice-triggered avalanche near White Pass on February 12th is a reminder of the potential hazard that cornices can pose. 

 

A party of three triggered this avalanche from below on a southeast aspect at 5400ft near Skyline Lake, Stevens Pass on February 16th. Two members of the party were fully buried and one was partially buried. The party self-rescued and no injuries were sustained. Photo: Dustin Riggs 

Weak Layers

So far this season, we’ve had limited persistent weak layers to deal with. February’s periods of calm weather developed a couple of weak layers and problematic interfaces that later got buried in the snowpack. On a whole, weak layers have been short-lived and have generally resolved within a couple of days of being buried. While the following weak layers are no longer major concerns, some readers may want a more in-depth understanding of them before venturing into the mountains.

In the Stevens Pass and East Central zones, the February 4th interface consisted of a thin layer of small (0.5-1.0mm) facets sitting on the stout February 1st melt forms (crust). The crust was widespread on all aspects up to at least 7500ft and the facets were most prominent on the northern half of the compass (west through north through east aspects). A major storm and avalanche cycle February 4th-7th totaled over 60 inches of snow. The February 4th interface was responsible for widespread avalanching including slides up to size D3 at most elevations. As direct action avalanches subsided, the February 4th interface was deeply buried and didn’t produce further triggered avalanches. Interestingly, as recent as February 18th, this interface was found in a profile and produced some mixed and head-scratching test results. While this interface is not a concern for triggered avalanches, you may still be able to find it 4-6 feet below the surface, especially on sheltered, shaded slopes at upper elevations.

 

A profile from 6460ft on a northeast aspect in the Chiwaukum Range on February 18th shows the February 4th layer. Small column tests produced sudden planar results while a Propagation Saw Test did not indicate propagation.

A more elusive and problematic layer for triggered avalanches was the February 13th interface. This was also most prominent in the Stevens Pass and East Central zones in addition areas of the West Central and Snoqualmie Pass zones. At Stevens Pass a combination of large (2.0-4.0mm) surface hoar and small (0.5mm) near-surface facets developed on a variety of surfaces and were buried on the 13th. The weak layer was most problematic on east through south aspects between 4,500-6,000ft, where the grains were preserved as they rested on a thin crust. It seemed that outside of this aspect and elevation range either 1) the weak grains did not persist enough to be triggered by travelers or 2) the underlying layer, or bed surface, wasn’t hard enough for the weak layer to be reactive. A number of parties reported natural and triggered avalanches on southeast aspects during the storm cycle on Presidents Day weekend. This included a party of three that were uninjured after all being caught, with two full-burials, in a surprising avalanche near Skyline Lake on the 17th. As of February 20th, the interface is 1-3 feet below the surface and has become difficult to trigger. The February 13th interface is still visible in the snowpack and we continue to monitor it. It will likely become inactive before the end of the month.

In summary, February has been a great time to explore the mountains and enjoy the longer days for recreating in this season’s robust snowpack. Though, not without complexity and variability. Continue to monitor changing conditions and check the daily avalanche forecasts for the most up to date information. 

Avalanche Problems

Storm Slabs

A heavy load of new snow rests on weak and variable old snow surfaces. Large avalanches are likely, and slopes 30 degrees and steeper are primed for human triggers. Avalanches could break widely across terrain features and run far distances. You can trigger avalanches from below, and on slopes adjacent or connected to avalanche terrain. These may not be the common storm slab conditions we have dealt with most of the season so far. Fresh slabs overlie weak layers of buried surface hoar and near-surface facets formed during periods of cold, clear weather before the storm. The new snow does not appear to be bonding well to old snow surfaces, and this may become a lingering issue. In wind affected terrain, slabs could be several feet thick and avalanches could grow even larger. The snowpack needs time to adjust. Watch for obvious signs of unstable snow like shooting cracks, collapses, and recent avalanches. Dig down 2-3ft in the upper snowpack and carefully assess mid-storm layers and the old/new snow surface looking for sudden and easy fractures. Steer around slopes 30 degrees and steeper and don't linger below avalanche path run-out zones.

Release of a soft cohesive layer (a slab) of new snow that breaks within the storm snow or on the old snow surface. Storm-slab problems typically last between a few hours and few days. Storm-slabs that form over a persistent weak layer (surface hoar, depth hoar, or near-surface facets) may be termed Persistent Slabs or may develop into Persistent Slabs.

 

You can reduce your risk from Storm Slabs by waiting a day or two after a storm before venturing into steep terrain. Storm slabs are most dangerous on slopes with terrain traps, such as timber, gullies, over cliffs, or terrain features that make it difficult for a rider to escape off the side.

 

Storm slabs usually stabilize within a few days, and release at or below the trigger point. They exist throughout the terrain, and can be avoided by waiting for the storm snow to stabilize.

Aspects: All aspects.

Elevations: All elevations.

Likelihood: Likely

Expected Size: 1 - 1