Avalanche Forecast
Regions: Mt Hood.
New and old avalanche problems have created a dangerous mix in the Mt. Hood area. Winds Thursday afternoon and night have created fresh wind slabs near and above treeline. The potential to trigger avalanches down several feet exists near and below treeline. Choose simple terrain to safely navigate this snowpack.
Discussion
Snow and Avalanche Discussion
Over 4 feet of snow fell during the 2/9-2/13 storm cycle. This new snow layered on top of a firm crust. Natural and skier triggered avalanches with the new snow and wind have tapered off during the week, but deeper avalanche problems have surfaced at the recent snow/old snow interface.
Several deep avalanches, averaging around 4 feet, were triggered Wednesday and Thursday by both skiers and explosives near and below treeline. Mt. Hood Meadows Patrol identified a layer of weak snow (1-2 mm facets) above a hard crust with at least one of these avalanches on an NE aspect.
Until we know more about the spatial distribution of this weak layer/crust combination, you will need to choose simpler terrain in all elevation bands. Â Â
We've received a lot of snow over the last few days. The risk of tree well and snow immersion suffocation is real in the trees. Don't travel alone and always keep in contact with your partner. You can learn more about deep snow safety here.
Snowpack Discussion
Since February 8th, the mountains (and low elevation cities) of the Pacific Northwest have experienced cold and very stormy weather. Significant snowfall has added up in all forecast zones. Records from Snoqualmie Pass DOT avalanche workers back to 1973 show that February 11-12th set a record for the most snow recorded in a 24hr period at that location. The table below shows storm totals starting February 8th through the morning of the 13thÂ
5 day totals ending morning of Feb 13th
Water Equivalent (inches)
24hr storm totals
(inches)
Difference in Height of Snow (inches)
Hurricane Ridge
1.97
N/A
+ 30
Mt. Baker
1.94
44
Â
Washington Pass
1.66
NA
+ 16
Stevens Pass
Â
2.71
49
Â
Snoqualmie Pass
3.91
80
Â
Mission Ridge
1.86
38
Â
Crystal
2.91
59
Â
Paradise
4.55
N/A
Â
White Pass
N/A
57 (4400ft)
+ 26 (5800ft)
Mt. Hood Meadows
4.70
43
Â
Heavy precipitation brought many mountain regions to their tipping point. Avalanches ran readily with a peak of snowfall intensity. For Stevens Pass, Snoqualmie Pass, East Central, West South, Mt Hood, and possibly West Central zones we have good confirmation that this cycle happened from the night of February 11th through the 12th. In other zones, snow totals havenât been significant enough for widespread avalanche cycles, or we lack data (like in the East South zone).
The high rates of precipitation drove avalanches in the storm snow. Notably, a persistent weak layer of facets and surface hoar was buried in most zones on February 8th. Storms produced a widespread and prolonged cycle of avalanches on the February 8th interface, involving a variety of aspects and elevations. Local ski patrols, highway workers, and backcountry travelers reported extensive avalanching with widely propagating crowns and very sensitive conditions. With less stormy weather, observers have just begun to get a sense of the extent of the avalanche activity. Triggering persistent slab avalanches will be a concern for backcountry travelers in zones where the February 8th weak layer is active for at least the near, if not distant future. Stay tuned for more updates.
Avalanche Problems
Persistent Slabs
Persistent slabs can break widely across terrain features, come down on top of you, and can be triggered from a long distance away. These avalanches are difficult to predict and can break wide and in surprising ways by wrapping around terrain features. Be especially suspicious near and below treeline where weak snow over a firm crust was most likely buried intact and recent avalanches have occurred.
If you hear large whumpfs, experience sudden collapses in the snowpack, see shooting cracks in relatively flat terrain or remotely trigger an avalanche, nature is trying to tell you deadly persistent slab avalanches are possible.
Choose simple terrain that’s much lower angled and not connected to anything capable of producing a large avalanche.
Release of a cohesive layer of soft to hard snow (a slab) in the middle to upper snowpack, when the bond to an underlying persistent weak layer breaks. Persistent layers include: surface hoar, depth hoar, near-surface facets, or faceted snow. Persistent weak layers can continue to produce avalanches for days, weeks or even months, making them especially dangerous and tricky. As additional snow and wind events build a thicker slab on top of the persistent weak layer, this avalanche problem may develop into a Deep Persistent Slabs.
The best ways to manage the risk from Persistent Slabs is to make conservative terrain choices. They can be triggered by light loads and weeks after the last storm. The slabs often propagate in surprising and unpredictable ways. This makes this problem difficult to predict and manage and requires a wide safety buffer to handle the uncertainty.
This Persistent Slab was triggered remotely, failed on a layer of faceted snow in the middle of the snowpack, and crossed several terrain features.
Persistent slabs can be triggered by light loads and weeks after the last storm. You can trigger them remotely and they often propagate across and beyond terrain features that would otherwise confine wind and storm slabs. Give yourself a wide safety buffer to handle the uncertainty.
Elevations: Treeline, Below Treeline.
Likelihood: Possible
Expected Size: 1 - 2
Wind Slabs
Fresh wind slabs will have formed Thursday and Thursday night on steep wind loaded slopes near and above treeline. Approach steep unsupported slopes with wind-drifted snow cautiously, feeling for firm or hollow sounding snow as a sign that wind slabs may be present. You can stay safe by traveling on ridges, wind-scoured areas and any slope less than 30 degrees.
In wind sheltered areas, storm slabs that formed over the last few days should be trending toward stubborn and unreactive. However, any avalanche triggered in the recent snow could result in a larger and more deadly persistent slab avalanche.
Release of a cohesive layer of snow (a slab) formed by the wind. Wind typically transports snow from the upwind sides of terrain features and deposits snow on the downwind side. Wind slabs are often smooth and rounded and sometimes sound hollow, and can range from soft to hard. Wind slabs that form over a persistent weak layer (surface hoar, depth hoar, or near-surface facets) may be termed Persistent Slabs or may develop into Persistent Slabs.
Wind Slabs form in specific areas, and are confined to lee and cross-loaded terrain features. They can be avoided by sticking to sheltered or wind-scoured areas..
Wind Slab avalanche. Winds blew from left to right. The area above the ridge has been scoured, and the snow drifted into a wind slab on the slope below.
Wind slabs can take up to a week to stabilize. They are confined to lee and cross-loaded terrain features and can be avoided by sticking to sheltered or wind scoured areas.
Aspects: All aspects.
Elevations: Alpine, Treeline.
Likelihood: Likely
Expected Size: 1 - 2